Available in three spindle sizes (with or without Optional MT2 Chucky Arbor)
The Alignment Adapters have a 3/4-10 thread that allows it to be mounted to our Chucky MT2 Arbor or a Live Center with removable cone that exposes a 3/4-10 shank.
If you already have a Chucky MT2 Arbor you do not need to order another.
It also comes with a Drift Pin(not shown) that functions similar to the included pencil for marking
the center point.
The Alignment Adapters have a 3/4-10 thread that allows it to be mounted to our Chucky MT2 Arbor or a Live Center with removable cone that exposes a 3/4-10 shank.
If you already have a Chucky MT2 Arbor you do not need to order another.
It also comes with a Drift Pin(not shown) that functions similar to the included pencil for marking
the center point.
All 3 Chucky Alignment Adapters shown
|
Chucky Alignment Adapter shown with Optional MT2 Arbor
|
The Chucky Alignment Adapter has many uses as shown below
Chucky Alignment Adapter inserted in Scroll Chuck
|
Chucky Alignment Adapter mounted on Live Center
|
Chucky Alignment Adapter mounted on Arbor
|
It threads into a Scroll Chuck and then onto a Live Center (with removable cone) or our Optional MT2 arbor (inserted into your tailstock) to align your workpiece to any Vacuum Drum.
|
|
|
You can also mark the center of your workpiece simply by inserting a pencil or Drift Pin into the hole in the adapter while the workpiece is held in your Scroll Chuck.
Can also be used the same way to align a Face Plate.
Can also be used the same way to align a Face Plate.
The Live Center is available here.