Top and Bottom view showing No-Nose Chucky, tenon and inserted nut.
The No-Nose Chucky allows you to mount an item with a flat surface from the inside or from the tenon side of the workpiece.
Of course, this is just one use for the No-Nose Chucky - let your imagination be your guide.
The dimensions of the No-Nose Chucky are 4" at the base, 1 7/8" diameter at the flat and 1 7/8" tall (the tenon height is not included in this dimension). These dimensions are approximate as each chucky is hand finished.
We do recommend ordering the optional 3" MT2 Aluminum Arbor to fully utilize this product.
Of course, this is just one use for the No-Nose Chucky - let your imagination be your guide.
The dimensions of the No-Nose Chucky are 4" at the base, 1 7/8" diameter at the flat and 1 7/8" tall (the tenon height is not included in this dimension). These dimensions are approximate as each chucky is hand finished.
We do recommend ordering the optional 3" MT2 Aluminum Arbor to fully utilize this product.
Bowl mounted for finishing with No-Nose Chucky (green) on the bottom and Optional Drive Chucky (red) on the inside.
|
Winged Bowl by Rudy Lopez
|
being held with a No-nose chucky on a MT2 Chucky Arbor
|
No-Nose Chucky with 3" MT2 Chucky Arbor
|
3" MT2 Chucky Arbor showing access hole and threaded hole
For information on the MT2 Chucky Arbor Click Here
This arbor also has a 1/4" access hole (and set screw) in the end to enable it to use our 3" and 6" Chucky Extension (click here) or any other item such as a sanding disc, buffs, etc.
You must have a live center with a removable cone to mount to the tailstock.
Click Here for Live Center ordering information.
This arbor also has a 1/4" access hole (and set screw) in the end to enable it to use our 3" and 6" Chucky Extension (click here) or any other item such as a sanding disc, buffs, etc.
You must have a live center with a removable cone to mount to the tailstock.
Click Here for Live Center ordering information.